PK3514
Features
Measure and log all common power measurement types: V, A, W, VA, VAR, kWH, PF, Hz, THD, etc.
Wide range of operating modes:
- frequency modes for 50Hz, 60Hz, 400Hz, variable frequency systems, and DC to cover all your needs.
- power modes for Positive Power Only (to get the correct answers even if a current probe is backwards), Negative Power Allowed (for regenerative circuits), 2 Current Power (for special distribution and metering systems), quad-power (for multiple parallel single-phase loads)
- Programmed start and/or stop for precise monitoring sessions, Stop When Full, Never Stop (write over oldest data first)
Able to evaluate all power systems: 3 phase Wye, 3 phase Delta (including 4-wire, open, and grounded), split-phase, single phase, quad single phase (using same source) , 3PT/3CT, 3PT/2CT, 2 current power, DC, quad DC (using same source).
The included Advanced PowerSight Manager software (PSM-A) improves your efficiency and eliminates sources of error at each stage of the monitoring process:
- TestPlan Manager™ to organize and automate your tests and the data retrieval
- SureStart™ expert system to advise if the connections or settings seem correct or not, prior to starting
- DataSetup Wizard™ to set your triggering and logging parameters according to your application
- ReportWriter Wizard™ to automatically generate error-free reports.
Benefit from the safety rating of 1000V CAT IIII, 600V CAT IV and Bluetooth Wireless Communications (remote viewing/control of the display without the burden of wearing PPE).
SD Memory for redundant storage and essentially unlimited logging capacity.
Extend the measurement range with the use of our industry-widest array of accessories and options:
- measure down to 0.002 amps AC (HA-GFD)
- measure from 5 to 2000 amps DC (DC600/DC2000)
- direct connect and measure to 15kV (5KVP/15KVP)
First rate technical support, direct from the manufacturer to you!
Specifications
General Specs
Category | Notes |
---|---|
Size | PS3550: 3.88" (9.86 cm) W x 7.72" (19.61 cm) L x 1.58" (4.01 cm) Deep at bottom end; 2.14" (5.44 cm) Deep at top end |
Weight | PS3550: 1.1 lbs (0.5 kg) |
Operating Range | 32 - 122 degrees F (0 - 50 degrees C) Relative humidity to 70% (non-condensing) |
Power Requirement | 12V DC @ 500 mA |
Battery Life | 8-10 hours after full charge |
Battery Type | Li-ion |
Sampling Rate | 16 microseconds for Voltage and Current |
Safety | 600V CAT IV, 1000V CAT III |
SD Card Slot | Accepts SD Cards to 32GB (SDHC) |
Logging Period (Resolution) | 1 Second - 99 Minutes |
Logging Duration (Length of session) | up to 2 years according to memory allocation |
Internal Data Retention | 8 years |
Other Features | Crest Factor, K Factor, Peak Demand Period, Peak Demand of Peak, Demand Period, Duty Cycle, On/Off Cycle %, Avg. On Time, Avg Off Time |
Voltage Measurement
Category | Notes |
---|---|
Measurement Range | 1 to 1000 volts (using included voltage probes), to 15,000 volts (with optional 15KVP voltage probes), to 6 megavolts (with input ratios) |
Display Resolution | 0.1V (below 400V), 1V (400V to 3999V), 10V (4000V to 39.99KV) |
Accuracy | 0.5% of reading ±0.3 Vrms |
Current Measurement
Category | Notes |
---|---|
Measurement Range | 2 milliamp (with optional HA-GFD), to 1,000 amps (using included HA1000 current probes), to 6 megamps (with input ratios) |
Display Resolution | 0.1 amps (below 400A), 1.0 amp (400 amps and above) |
Accuracy | ±0.5 % of reading plus accuracy of probes |
Components
PK3514 Complete Analysis System includes:
PS3550 Energy Analyzer
Four HA1000 1000 amp range flexible current probes
CAS3 Hard shell carry case
DXV deluxe voltage leads with Jumbo Alligator clips
AC Charger (specify 120 or 230 volt version)
PSM PowerSight Manager Software (PSM-A) for PC
Quick Start Guide (QSG)